All Categories
How to use? 1. Pre-heating the cleaning fluid. 2. Remove ink cartridges and the print head. 3. Choose the right type of syringe according to the color of the clogged print head that needs to be cleaned. 4. Inject the cleaning fluid into the print head that needs cleaning with a syringe. Leaving the bottom of the print head be soaked for about 8 hours. 5. Install the print head into the ink cartridge and load the printer, then run the "nozzle cleaning" function twice in printer driver. PS: Please refer to the manual instructions for more details. Notice: 1. After removing the ink cartridges, you could wrap them in plastic wrap and put them in a ziploc bag to prevent them from drying out. 2. The print head must be completely dry after being soaked, and then it can be installed in the printer. Otherwise it may cause short circuit that will lead to the damage of the print head. 3. Don't skip the longer soak if the shorter ones don't work. If that fails, It is recommend to try again after a day or two. Package: 1× Printhead Cleaning Fluid(100ml) 2× Syringe(10ml) 1× instruction manual