We specialize in hard to find items
(1)
PrimoChill 1/2in. O.D. Rigid PETG Tube - 6 x 30in. - Blood Red
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
About PrimoChill 1/2in. O.D. Rigid PETG Tube - 6 X
PrimoChill is once again helping performance enthusiasts, case modders, and those in search of the “Next Best” thing in watercooling. PrimoChill Rigid PETG Tube is one step further in the evolution of computer watercooling enabling the user to make the tightest bends and straightest runs without the need of excessive compression fittings and 90 degree angle rotaries. The less your build requires the more time and money you save searching for the right fitting. Specifications Inner Diameter (ID): 3/8in. ±.005 Outer Diameter (OD): 1/2in. ±.005 Wall Thickness: 1/16in. Length: 30in. Pack Size:6 Compatibility Fittings:1/2in. OD Rigid Fittings Parts Included 6 Pieces of 30 inch PETG tube Warnings With the use of different components, materials, fluids, and flow rates, results may vary with the appearance of your tubing. Rigid Acrylic Tube is designed to work with a large variety of cooling components, however the use of alcohols, Ethylene Glycol and as well as any other harmful chemicals is strictly prohibited and will void your warranty. Not responsible for any damage caused by or when using this product. Please use at your own risk. InstallationPLEASE NOTE: A bending insert is meant to have a tight fit. If it is loose, the rigid tube will collapse, kink, form air pockets and flat spots when heated. The tighter the fit, the better the result. This process requires patience, but will become easier the more you practice. The bending insert requires some stretching and lubricating to get it in the rigid tube. Steps to success are below: 1. Stretch the bending insert. Remove any excess that isn’t stretched. 2. Ream the rigid tube with an RFB for best results, (or a hand reamer if that's all you have). This will ensure a clean opening for easier insertion. 3. Lubricate by applying several drops of dish soap, olive...
