We specialize in hard to find items
(1)
Phrozen Engineering Series: TR250 High Temp Resin (LCD UV Curing Resin) for Engineering, Industrial Use, Jewelry and Dental Application, Applicable to 3D Printer, Deep Gray (500g)
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
About Phrozen Engineering Series: TR250 High Temp Resin
Specification & Performance Weight: 500g per bottle XY Resolution: 0.047 mm Layer Height / Parameter: 15 sec @ 50 um, Delay 3 Way to Clean Printed Part: Use alcohol spray to clean models and dry it by air gun. Do not immerse printed part into alcohol over 30 sec. Compatible Printer: Phrozen Shuffle, Shuffle XL, Make ParaLED, Make XL ParaLED, Phrozen 1.5 Application: Rubber Mold for Jewelry, Fine Details GK Kit, Heat Resistance Application Key Performance: Viscosity: 61 mPa.S (25C) Density: 1.10 g / cm3 Tensile Stress (Break): 68 MPa Elongation: 8.5% Tensile Modulus: 1050 MPa Hardness: Shore 80D About Resin Operation Avoid sun light exposure. After printing, stored used resin in closed and opaque bottle. DO NOT mix fresh resin and used resin. Shake or stir resin properly to avoid pigment separation. DO NOT dump resin. Please cured resin and treat/recycle it as general plastics garbage. Safety Recommendation Do your best to wear glove, goggles, long sleeves shirt during usage of resin. Wash hands after every operation. DO NOT swallow resin. Go to hospital if you do it. Avoid eye contact by resin. Rinse with water and go to hospital if resin contacts eyes. Resin might cause slight skin irritation. Stop using it if allergy occurred. Resin smells. We strongly suggest you to use it under ventilated condition. Keep resin in room temperature(15 - 35 Celsius) and dry condition. Keep resin away from kid.
