All Categories
How to use the jump starter to start a car? Important Attention:For Car jump start (1).For jump start your car,please first checke your car's displacement to make sure it can use. (2).If your car's battery is good and you just want to test this emergency battery.please do below(2.1)to(3) If your car's battery have problem and can't start car,just do below(2.2)(2.3)(3) (2.1).Lossen the screws on your car's battery,just need lossen one pole (2.2).Connect red clamp to positive wire,black clamp to negative wire.please make sure there is enough contact surfaces. (2.3) Plug into battery hole,please plug into the end (3).Switch button to "ON",then Prees the round power buttoon,and go to your car to start. (4).After start your car ,please take off the clamp in 30S. Note:IF your car's battery is good and you don't do the step(2.1),it may cause battery damage!! How to use our product Charging/power supply to your 5V device(Smartphone/tablet/PSP/Mp3)?①.make sure there is at least one power indicator lighting on the power bank ②.choose a right connector,and connect to the device ③.connect the power bank(5V/2A will charge quickly) ④.Press the round button How to use our product's high quality led light torch function? ①.make sure there is at least one power indicator lighting on the power bank ②.Long press the power button about 3 secs ③.then you can press power button to change mode(SOS/Fast flashing/Lighting) How to charge this power bank? You can use car charger or AC charger to charge this jump starter. Package included:√ 1x 10000 mAh jump starter battery √ 1x Charging plug √ 1x Car charger adapter √ 1 x Four-in One USB Charge Cable √ 1x Storage battery wire clip √ 1 x PU Package √ 1 x User's Manual