All Categories
Product introduction The installation method 1)Verify the product and accessories that come in the box, and read the product instructions for installation. 2)Connect the silicone tube to the bottom of the water dispenser, and connect the outlet pipe to the fuselage of the water dispenser,then insert the pipe into the barrel containing the water. 3) Make sure the sealing gasket on the bottom of metal spout was PROPERLY INSTALLED, ATTENTION: If the sealing gasket wasn't installed properly, it will leaking, please reinstall the sealing gasket again to make it do not leaking. We also have equipt an extra sealing gasket for replace in the package. 4)Before the first use please charge for 3 hours. To charge the water dispenser use the included USB cable to connect mobile phone charger(5 v) (not included), when the water dispenser is fully charged an indicator light on the dispenser will turn green. Operating instructions 1)If looking to dispense a lot of water, press the on 1.2L key. Press the off to stop. 2)The amount of water dispensed can be controlled by selecting either 0.5L, 0.8L or the 1.2L water buttons. If you want to stop the amount water selected to dispense halfway press the off key to stop. Power:4w Voltage:3.7V Size:pipe length 55cm Battery:1200mA Mode;:CSQ-01 N.W:450g