MICROYUM NodeMcu Esp8266 Color Display Basic Starter Kit with esp-12E & 2.0 inch SPI Color TFT Display Screen for Iot Weather Station

Pay with

About MICROYUM NodeMcu Esp8266 Color Display Basic

MICROYUM Nodemcu esp8266 esp-12E IOT Display Kit This kit is a great way to get started with Internet of Things (IoT) and Arduino compatible micro controller programming. Introduce: ESP8266 ESP-12E Development Board 802.11 b/g/n protocol Wi-Fi Direct (P2P), soft-AP Integrated TCP/IP protocol stack Integrated TR switch, balun, LNA, power amplifier and matching network Integrated PLL, regulators, and power management units +19.5dBm output power in 802.11b mode Integrated temperature sensor Supports antenna diversity Power down leakage current of < 10uA Integrated low power 32-bit CPU could be used as application processor SDIO 2.0, SPI, UART STBC, 1x1 MIMO, 2x1 MIMO A-MPDU & A-MSDU aggregation & 0.4 s guard interval Wake up and transmit packets in < 2ms Standby power consumption of < 1.0mW (DTIM3) 2.0 Inch SPI Color TFT LCD Display Module with MicroSD Card Socket Driver IC: ILI9225 Operating Voltage: 3.3V/5V Display Area Size: 176(RGB) x 220 (2.0 inch) Color: 262K Interface: 4-Wires SPI (Serial Peripheral Interface) Compatibility: Arduino, Raspberry Pi, 51, STM32, ESP8266, NodeMCU and so on. Packing listing: 1 x Nodemcu ESP-8266 12-E development board 1 x 2.0 INCH SPI TFT DISPLAY MODULE 20 x Dupont Jumper Wires You can get the sample project follow this link: https://github.com/microyumcc/ESP8266-Simple-Yahoo-Weather-Station