All Categories
DC Output Voltage:24V (±10% 22V-26V) ; Output Current:20A; Incoming wire stability:±0.5%; Ripple and noise :150mVp-p; Efficiency:90%; Load stability:±1%; DC voltage range :±10% 22V-26V; AC input voltange range: AC 110V(90V-132V AC) / AC 220V (170-264V AC) ,110V / 220V through the input voltage switch to switch, the default setting of the voltage is 110V. Overload protection: 105%-150% cut off output; Reset: Self reset; Over voltage protection :120%-140% rated output voltage Start,Rise,Hold time:200ms,50ms,30ms; Operating temperature: -10 ℃ - +50 ℃;Power fan working temperature: 40 ℃ ± 5 ℃. Working humidity: 20% -90% RH Dimensions: 215 * 115 * 50mm / 8.46 * 4.52 * 1.97in (L * W * H); Weight: 1.1KG / 2.43lb. In-door use only, for this switching power supply is not waterproof. Use and precautions: 1. Before inputting the voltage, make sure that the input voltage is in line with the operating voltage of the power supply. (The power supply supports 115V AC / 230 V AC through the switch, the factory default setting is 115V). The wrong input voltage will damage the power supply (for example, when the switch is switched on at 115V and the input voltage is 230V, it will damage the power supply.) 2. Input DC positive (1, 2, 3) and negative (4,5,6) three terminals, the internal lines are connected in parallel. Pay attention to positive and negative, do not reverse. 3. The power is the use of fan forced air-cooled (direct drive ventilation), power supply with over-protection, overload protection, short circuit protection, reverse protection. 4. The internal components of the power supply are the best quality, the factory has to undergo a rigorous test, non-general cheap power supply comparable. Can be used for high-end industrial equipment power supply. Package Included: 1*DC 24V 20A 500W Max Switching Power Supply