All Categories
Specifications: Weight: 60g(2.1OZ) Dimension: 40*20*40.5mm(1.57*0.78*1.59inch) Speed: 0.16sec/60°(7.4V) Accuracy: 0.3° Torque: 15 kg·cm (208 oz·in) 6.6V;17 kg·cm (236 oz·in) 7.4V Working Voltage: 6-7.4V Min Working Current: 1A No-Load Current: 100mA # Spline: 25T(6mm diameter) The servo wire: 30cm(11.8inch) in length Control Specifications: Control Method: PWM Pulse Width: 500~2500 Duty Ratio: 0.5ms~2.5ms Pulse Period: 20ms Please make sure that the duty cycle of the controller you are using conform to our specifications, otherwise the servo can't turn up to claimed degree Wire Layout: Red Wire: + Black Wire: GND White Wire: PWM/Signal Package Contents: 1 x Digital servo 1 x 30cm servo wire 1 x Servo horn kit(as shown in the figure) If you have any questions, please feel free to contact us at [email protected] Note: Note: Please be sure to avoid locked-rotor when using servo, locked-rotor means that artificially or machine obstructs the servo to rotate normally, the locked-rotor will lead to internal current increased to more than 7 times and the temperature increases, servo will burn out. Notice for use: 1. It's recommended that use lithium polymer battery with high rate discharge(min 5C), please don't use dry battery. 2. Please use a short and thick power cord, don't use Dupont cord