We specialize in hard to find items
All Categories
KNACRO Automatic Battery Charging and discharging protection board Anti-overcharge Low-voltage negative pressure protection [36V dedicated] (36V)
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
About KNACRO Automatic Battery Charging And Discharging
The role of the module: This module with a delay off function and can automatically restore the output function, that is, in the battery owed to the duration of 3 to 5 seconds, the module will disconnect the output, so as to avoid the start of high current load battery voltage fluctuations and errors action; When the output is turned off, if the battery voltage rises to a fully charged voltage, the battery will automatically turn on the load, disconnect and charger connection, undervoltage and full charge voltage value can be adjusted by potentiometer Set your own (setting method and attention please refer to picture). Example 1: Such as the load for the motor, start, the battery voltage will fluctuate, this can be used with a delay, delay 3 to 5 seconds enough to restore the battery voltage stability value. Example 2: When the car just started, the car lights will flash, but also because the start current is relatively large, battery voltage fluctuations, and this can be used with a delay, delay 3 to 5 seconds, enough to restore the battery voltage . Wiring should be noted: Connect the load first, then the battery, and then the charger interface. The first time the module is connected, if the battery voltage does not reach the full voltage, the load is not necessarily connected. If you want to force the start, you can use the metal tweezers in the picture indicated by the two short-circuit point can be forced to start.
