All Categories
DLS-30/IQ4 IOTA Engineering Power ConverterThe DLS battery charger/power converter from IOTA Engineering converts nominal AC to DC Voltage. As a power supply, its tightly controlled regulation allows the user to operate any appropriate nominal DC load up to the converters rated output current. As a battery charger, the DLS will maintain the battery, delivering its full-rated current when the battery capacity falls sufficiently low. The voltage is set to deliver its maximum current for the necessary period of time that minimizes undue stress to the battery caused by heating of its cells. This helps to ensure the longest possible life of the battery. Over time, as the battery nears its full capacity, the converter will float-charge the battery to prevent self-discharge of its cells. Switch-Mode Technology Tight Line-Load Regulation Quickly And Efficiently Charges Batteries Designed To Withstand Low Transient AC Line Voltage Current Limit And Thermal Or Overload Protection Lower Operating Temperature Quiet Fan Operation External Reverse Polarity Fuse Protection From Incorrect Battery Connection High And Normal-Stage Charging Jack Limited 2 Year WarrantyConverts : 108 To 132 Volt AC To 13.6 Volt DCContinuous Output Power (W) : 400 WattPeak Output Power (W) : 400 WattAmpere Rating : 30 AmpEfficiency : 80 PercentNumber Of Outlets : 2Length (IN) : 9.7 InchWidth (IN) : 6.7 InchHeight (IN) : 3.4 InchRemote On/Off Capable : NoWith USB Port : NoWith Volt/Watt Meter : NoWith Short Circuit : YesWith Reverse Battery Protection : YesWith Thermal Protection : YesWith Battery Cables : NoWith Built-In Charger : YesWith Fuse : Yes