All Categories
Best SurfacesYou can apply iImagine Vinyl to any dry, smooth surface that has been properly prepared. A few popular choices include: Walls Wood (when sanded smooth) Glass Porcelain Plastic MetalWhile versatile, rough or porous surfaces do not accept adhesive vinyl. They include: Cement Brick Stucco Leather FabricsPrepping the SurfaceSandingYou will need to sand down the wood until it is completely smooth. Use a 150 grit sandpaper and then finely sand it with 220 grit. Avoid applying vinyl to any surface with large imperfections, like wood with large, rough knots.CleaningWipe any dust off the surface, and wash the item if you can, even if it just means wiping it down with a damp cloth. Clean the surface with a combination of vinegar and water, an ammonia-based cleaner, or isopropyl alcohol to ensure all oils are removed.DryingEnsure the surface is completely dry before applying the vinyl. If necessary, leave the surface to air dry for a few hours to make sure all moisture is gone.Frequently Asked QuestionsWhat Finishes Are Available?iImagine Vinyl has three finishes available: matte, glossy, and metallic.Can Vinyl Go through the Dishwasher?Yes, the vinyl has been tested through 10 high-temp dishwasher cycles, back-to-back. It's also safe to hand wash with hot soapy water.Can This Vinyl Be Used for Iron-On Designs?No, you are looking for Heat Transfer Vinyl (HTV)What Surfaces Can I Put Vinyl On?Any smooth, dry surface that has been properly prepared (see above for how to properly prepare the surface)Can I Print on Vinyl?No, you are looking for printable vinyl.