We specialize in hard to find items
All Categories
Hffheer Toilet Automatic Flush Valve Infrared Sensor Urine Flush Valve Water-Saving Electronic Urine Sensor Flusher Urinal Inductive Flush Toilet Automatic Flush Set
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
About Hffheer Toilet Automatic Flush Valve Infrared
Specification: Applicable water pressure: 0.2MPa-0.10Mpa (Mpa) Outlet diameter: 1 (inch) Material: stainless steel copper tube Battery box: 4 x AA batteries Sensing distance: 53cm Inlet and outlet diameter: G (1/2)" Transformer: connect 110-220V voltage Valve Size: 12 x 11 x 9cm / 4.72 x 4.33 x 3.54 inch (appr.) Sensor board 13 x 13cm / 5.12 x 5.12 inch (appr.) Install steps: 1. Dash installation location, cut trenches, lay pipes, flush pipes, connect inlet pipes to install products, paint walls, subsidize tiles (Note: Before subsidizing tiles, strict water test pressure is required to ensure pipelines and The joint does not drip, leaking) 2. The diameter of the inlet pipe must be 1.5-2 inches, in order to increase the flow of flushing debris in the toilet. 3. After the product is installed, connect different plug-in wires, make sure that the contact is good, and install the product panel. 4. Send power, send water and perform product function test. 5. When replacing the battery with DC products, remove the stainless steel panel with the suction cup, remove the decorative panel, and remove the battery box. The battery requires 4 sections of alkaline batteries that are factory-made within half a year. Different brands and old and new batteries cannot be mixed. 6. Please ensure that the induction is used within the water supply pressure range of 0.2mpa-0.7mpa (best use water pressure 0.3-0.6mpa) Package List: 1 x Automatic Stool Flush Valve 1 x Induction panel 1 x Battery box 1 x Transformer 2 x Copper Ring Fitting 1 x Manual
