We specialize in hard to find items
(2)
Heat Transfer Vinyl Letter Remover ALBACHEM VLR 1020, 3 Pack 60 fl oz.
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
About Heat Transfer Vinyl Letter Remover ALBACHEM VLR
Directions for use: Use only in a well ventilated area. DO NOT CUT SPOUT. Dispense from the pinhole already in spout top. Apply liberally from the inside of garment to the underside of the heat applied material. Allow VLR to soak thru and thoroughly wet the backside of the vinyl lettering. **WAIT 30 SECONDS** This will release the vinyl from the substrate. Once the vinyl lettering is ready to peel, pick carefully at one corner and slowly peel. If it is too difficult to get an edge started, slightly stretch or pull the fabric at one corner. This will make the heat applied material start to peel off of the garment. Pull off the remaining letter/number. Remove any residue left on the front side of the garment by applying AlbaChem Vinyl Letter Remover to a clean white terry cloth rag and rubbing off the residue. Repeat process if necessary. If residue is showing when starting to peel letter, WAIT 5-10 more seconds before pulling transfer off. It is very important to allow the VLR Vinyl Letter Remover time to completely attack the adhesive.
