All Categories
How to use these paintless dent puller tools :(Suit for dent&ding and home DIY repair) 1.clean dent surface 2.put the glue to gun and heat,connect the power source and preheat for 5-10 minutes 3.According to the Dent size to choose the Glue Puller, more bigger dent size,more bigger the glue puller and will larger force. 4.immediately place pad in the center of the dent and hold until sticks 5.Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter. 6.After the glue cooling,use a dent lifter or T-bar to align and press the puller to pull up the dent. 7.Spray alcohol on the residual glue, remove it with glue scraper, clean the repaired place with a clean wet cloth 8.If dent still exists,repeat the steps to remove the dent more perfectly Packing List: 1x LED dent board 1x Tool bag 1x black dent lifter 1x 100W glue gun 1x Pops a dent 1x rubber hammer 1x silver tap down 1x Silde hammer 1x mini T-bar 1x metal tap down with 9 heads 1x Plastic shovel 5x blue puller tabs 9x black puller tabs 4x yellow puller tabs 18x yellow glue sticks 1x manual