All Categories
How to use these paintless dent repair tools: 1.clean dent surface,If the dent so small and can't see where is it,use a dent board to check where is the dent. 2.put the glue to gun and heat,connect the power source and preheat for 5-10 minutes 3.According to the Dent size to choose the Glue Puller, more bigger dent size,more bigger the glue puller and will larger force. 4.immediately place pad in the center of the dent and hold until sticks 5.Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter. 6.After the glue cooling,use a dent lifter or T-bar to align and press the puller to pull up the dent. 7.If dent still exists, check with a Line board again, knock it slightly with a flattening hammer or pen 8.After finishing the dent,use the alcohol to clean the glue which on the car and the puller sets. Package: 1x black dent lifter 12x black puller tabs 6x White glue sticks 6x yellow glue sticks 1x manual