All Categories
Product Plugging Scenarios: - 8.1 in diameter plug, special plug designed for the toilet, tight fit, does not hurt the glaze - 4.5 in diameter plug, close to the ground, greater pressure - 2.4 in diameter plug for sink - 2.0 in diameter plug, suitable for bathtub, wash basin, can deeper insertion, stronger air pressure, and better effect How to use: Step1: Before used should be based on the size of the blocked pipe diameter, switch to select the appropriate gag to install. Provide four different sizes of gag, the toilet choose the largest gag or the second largest plug mouth. Step2: After installing the plug, hold the gun handle with your left hand and twitch the pumping lever with your right hand, pump it about 15-25 times until the pressure does not move. Step3: Gagged tightly hold the small nozzle, if not closed, add water to make the water diffuse through the nozzle. At this point can trigger the trigger, hit the air flow, plugs in the pipeline should be followed by strong air washed away PACKAGE INCLUDE: 1x Toilet Air Blaster 1x Splash-proof Film 4x Different Sized Suckers TIPS: 1. Due to the actual clogging situation, If a failure, please do it more times. 2. If there is no water in the blockage, please adding a proper amount of warm water to help the plug close to the drain and provide better air tightness. Warm water can make the plug softer and easier to clear. 3. Due to the large air pressure, if the pressure is insufficient during the use, the water may be splashed. Therefore, it is recommended to use the splash-proof film or newspapers to shield the device before the operation.