We specialize in hard to find items
All Categories
Pirit PWL-03-50 50-Feet Heated Hose, 50'
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
About Pirit PWL-03-50 50-Feet Heated
No more frozen hoses! The Pirit Series II heated hose provides a constant source of water in freezing temperatures. Thermostatically controlled, turns on when temperatures are below 45° F, off when temperatures are above 50° F. Heater wires are extruded directly into the hose walls for uniform heating & unrestricted water flow. Hose features high-quality knit reinforcing & an abrasion resistant cover Made for outdoor use. Protective bend restrictors at both ends provide added protection during freezing temperatures. Length: 50' Inner diameter: 5/8" Cold weather water hose thermostatically controlled, turns on when temperatures are below 45° F, off when temperatures are above 50° F hose has been tested to -42° F (-41° C ) Grounded power supply grounded nickel plated brass female & Male Coupling protective bend restrictors at both ends abrasion resistant cover knit reinforcing heater wires are extruded directly into the hose walls for uniform heating & unrestricted water flow certifications: UL listed, met approved, FDA approved materials. Electrical rating: 360W 3. 0 amps 120V 60 Hz. Care & use: simply unroll the hose to use just as you would a normal garden hose. Screw the female end (near the electrical cord) of the hose onto your faucet. Make sure the washer is in place inside the female coupling. Plug the 3-prong cord into a ground fault circuit Interrupter (GFCI) or a properly-grounded 3-hole outlet that is protected by a GFCI. The heater is thermostatically controlled & will not turn on unless the ambient temperature approaches freezing temperatures. It is good practice to drain & unplug the hose when not in use to extend the lifetime of the hose. If water is frozen inside the hose, allow several Min For the ice to melt after plugging in the hose & before use. Do not pull or tug the hose with excessive force as this may damage the fittings & ele
