All Categories
NOTE : 1. Before bid, please make sure your mobile frequency is 700mhz AT&T in your area. 2. This AT&T cell phone signal booster can only make the weak signal stronger , it can't creat signal , that's means it won't give you any help in an area where there is no signal at all . 3. You should get 2- 3 bars of stable signal in the location where the outdoor antenna is fixed in . Specification : Frequency range : Band12 Downlink 728--746MHz, UPlink 698--716MHz Model; PLX-BA70 Max. Output Power: Uplink:17.70dBm Downlink:7.85dBm Max. Gain (dB):62+-2dB I/O Port:SMA-Female on both ends Power Supply:DC 5V from adapter FCC Classification: B2W/Wideband Consumer Booster(CMRS) Max. Antenna Gain:Uplink:8.1dBi Downlink:6.6 dBi Package Contents: * AT&T Cell Phone Signal Booster * Indoor Panel Antenna with 16ft coaxial cable * Outdoor Panel Antenna With 32feet Cable * Screws for Mounting * AC Adapter * English User Manual Guarantee: 30 days- Money back Guarantee One Year Manufacturer Warranty FCC authentication certificated Installation Guide: 1.Check and find a place where your cell phone can receive the best signal outside your house, usually on the roof, or similiar high places, then fix the outdoor antenna there, and the outdoor antenna should be pointing to the cell tower's direction. (The outdoor antenna should not be higher than the lightning rod on top of the building.) 2.Fix the repeater device somewhere inside the house, the repeater should be fixed in a place where is near from the power socket, and have good ventilation. 3. Runs the cable on the outdoor antenna into the house, and connect the antenna cable connector on the OUTDOOR port of the repeater tightly. 4.Tightly connect the indoor panel antenna on the INDOOR port of the repeater. 5.Turn on the power of the repeater.