All Categories
I charger requirements and functions: 1. Apply Micro USB DC 5V input,charging independently in single slot and management system 2. Have two kinds of charging current to choose from (500ma/1000ma). 3. The LED display charging status 25% 50% 75% 100%. 4. Can automatically identify the lithium electricity (Li-ion) and nickel metalhydride batteries (Ni- MH battery) and manually choose iron phosphate (Liepo4) battery, (automatic identification of 1.2V/3.7V battery, manually choose 3V/3.85V battery). 5. 0V voltage activation function, 1.6-2.2V can't charge. 6. Put a charge, short circuit, bad battery intelligent recognition and reverse connect battery pro -tection. 7. Voltage and current are stable at charging mode 8. By the constant current, battery charger power supply is 5v, 1a (micro connector). 9. Has the automatic identification function with standard 5V/1000mA USB. II The description of the buttons and functions 1. The Charger has a button to select the charge current easily.An option to switch between 500 ma - 1000ma by holding switch button for 2sec in any case. Gently pressing the select key can change rechargeable batteries, when the batteries are selected, It will be in the charging st- atus in 5 seconds. 2. When connected to 5V power, all LED display will turn on, but if no batteries in the charger, broken battery LED display will keep blinking. 3. When charging, the charger can auto detect battery type between 3.7v type Li-Ion,1.2v type Ni-MH, 3.0V type Liepo4 and 3.85v Li-Ion (need manual selection). It will be in the charging sta -tus in 5 seconds.Lightly press on button to view battery type on charging mode.