We specialize in hard to find items
All Categories
BN-280 GPS Module NMEA-0183 TTL Level Dual Glonass GPS with 1PPS Flash for Arduino Pixhawk Aircraft Flight Control FPV Freestyle Drone Quadcopter RC Airplanes APM 2.8
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
About BN-280 GPS Module NMEA-0183 TTL Level Dual Glonass
Features: Dimension: 28mm*28mm*8mm Weight: 12.8g Connector: 1.25mm 6pins connector Specification Chipset: M8030-KT Receiving Format: GPS, GLONASS, BEIDOU, GALILEO, SBAS, QZSS. Default GPS, GLONASS, SBAS, QZSS. Frequency: GPS L1, GLONASS L1, BEIDOU B1, GALILEO E1, SBAS L1, QZSS L1 Channels: 72 Searching Channel Sensitivity Tracking: -167dBm Reacquisition: -160dBm Cold start: -148dBm Hot start: -156dBm Accuracy Position Horizontal: 2.0 m CEP 2D RMS SBAS Enable (Typical Open Sky) Velocity: 0.1m/sec 95% (SA off) Timing: 1us synchronized to GPS time Acquisition Time Cold Start: 26s Warm start: 25s Hot start: 1s Data output Support Rate: 4800bps to 921600bps, Default 9600bps Data Level: USB, TTL or RS232 level. Default TTL Level Data Protocol: NMEA-0183 or UBX, Default NMEA-0183 Update Rate: 1Hz-10Hz, Default 1Hz NMEA Message: RMC, VTG, GGA, GSA, GSV, GLL FLASH: 4M FLASH, Store the configuration permanently Operational Limits Altitude: 50,000m Max Velocity: 515m/s Max Acceleration: Less than 4g Power Consumption VCC: DC Voltage DC Voltage 3.0V-5.5V,Typical: 5.0V Current: Capture 50mA/5.0V Environment Operating temp: -40 °C ~ +85°C Storage Temp: -40°C ~ +105°C Pin Description: 1: PIN 1PPS: 1 pulse per second when 3D fixed 2: PIN GND: Ground 3: PIN TX: TTL serial data output. 4: PIN RX: TTL serial data input. 5: PIN VCC: 3.0 V-5.5V supply input, Typical: 5.0V 6: PIN BOOT: N.C Packaging List 1*BN-280 GPS Module 1*15cm cable
