All Categories
Bearifi Edge Mesh AP Router + Satellite ExtenderIncludes: •1 AP / Router or Extension unit •1 Satellite / Extender unitDual Mode: Wifi Extender or Router and Extender 1. Configure the AP unit with our web browser. Use it as a router or connect it as an extender to a pre-existing router and wifi signal. Bearifi's AP/Satellite is compatible with standard wifi signals 802.11ac. In wi-fi extender mode, you can repeat an existing Wi-Fi signal from your current router. A separate network called "Bearifi" broadcasts in your home. Change the network name to match your home network to roam between your router and the Bearifi devices. To replace your existing router, or have all devices in your home on the same IP chain, you can set up the Bearifi Mesh AP Router in router mode. It will send a signal to all satellites on the network.2. Place the satellite on the other side of the house or office, near a streaming device, or move as needed where wifi signal is low.Range:Bearifi Edge Mesh 2 pack can cover up to a 4200 sq ft single story home if used in conjunction to an existing router. You can operate up to 10 Satellites with one Bearifi Edge Mesh network, all connected to the original AP Unit. Most homes need only the original 2 pack, however, homes with multiple levels should consider adding an additional satellite on each floor with the AP unit at the center.Specifications:•QuadXT antenna for high output power long range 802.11ac Wi-Fi reception. •Beamforming sends signals directly toward connected devices.•Automated Dual Band smart technology connects your devices on either the 2.4 GHz or 5 GHz band signal, with full roaming capability.Compatibilities: Universally Compatible with any Wi-Fi enabled device. Configure over any web browser.Gigabit and 10/100 Ethernet ports for any LAN devices.