All Categories
Package Include: 2 x Screw Lock Carabiner 30KN 1 x Figure 8 Descender 35KN Locking Carabiner Specification: Material: 7075 Aircraft-grade Aluminum alloy (Anodized);Hot Forged. Certification system: CE Dimensions (L x W): Approx. 11.2 x 7.5cm/ 4.40 x 2.95 inch Maximum tension: 30KN (3000kg*g) Color: Blue. Gate Type: Screw-lock Figure 8 Descender Specification: Material: 7075 Aircraft-grade Aluminum alloy (Anodized);Hot Forged. Size: 5.5" x 2.9"(L*W). Breaking Strength: 35kN / 7,700 lbf. Rope Capacity: 1/3" - 3/5". Weight: 4.2oz. Color: Blue. Pay attention!: It is NECESSARY to receive adequate training (knowledge of techniques and security measures) before using the tools. Incorrect use or improper maintenance could lead to serious accidents even fatal. Please read carefully or learn enough knowledge before use. No matter how many times you've rappelled, perform the following safety checks: First, verify that when you hold the two strands of the rope parallel to each other, the rope runs through the figure 8 device in a symmetric fashion and the tail end of the rope is on the same side as your dominant hand. If one or both of those is not true, you've rigged the device incorrectly. Second, Double-check that the locking carabiner attaching the figure 8 device to your harness is locked, and oriented so that it's only loaded on the top and bottom ends -- not across the middle. And finally, verify that your climbing or rappelling harness is correctly fastened.