We specialize in hard to find items
All Categories
Automatic Self-Activation Fire Extinguisher Ball Fire Suppression Device (5pcs)
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
About Automatic Self-Activation Fire Extinguisher Ball
Specifications ☆ Model: HY-0500 ☆ Weight: 500g @ ☆ Diameter: 100mm ☆ Activation time: ≈2s ☆ Extinguishing Range: ≈ 1m³ ☆ Life span: 5 years ☆ Active ingredients：Environmental harmless Dry Powder（NH4H2PO4） ☆ Standards: Compliant with GA 602-2013, RoHS, CE and NPS standards. Installation 1.The package comes with 2 screws and screw wall anchors, a bracket/mounting which has two mounting holes and the fireball. 2.Place the fire extinguisher ball above the fire hazards with the bracket/mounting. Kindly suggest placing two in the same location to achieve the best protection. 3.Place the mounting to the intended installation place then with a pencil, pen or marker make markings for the bracket/mounting holes on the surface. With a drill make holes on the markings same size as the screws anchors. 4.Put the anchors and push them in with a soft hammer and take care not to damage them until they are flash with the wall. Get the bracket/mounting and secure it with the screws with a flat or star head screw driver until they are tight enough but don’t over tighten though. 5.Place the fireball securely on the bracket/mounting with the arrow pointing down. Precautions 1.Make sure you don’t rapture or remove the plastic film on the extinguisher as it protects it from moisture and water plus damage to the activation mechanism. 2.Don’t deliberately throw or expose the extinguisher to the fire unless you are doing tests. 3.When the extinguisher has been used sweep off the powder with a broom or vacuum cleaner and dispose it off appropriately. 4.In case the powder comes into contact with skin or eyes wash it off with clean running water.
