We specialize in hard to find items
All Categories
Automatic DC12V Double to DC24V,Rated 120A- 1500W Winch Booster ,Accelerate Speed By 2 Batteries, Supply 24/12V/500A Automatic Converter Used To SUV Jeep Track Competition Extreme Offroad
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
About Automatic DC12V Double To DC24V,Rated 120A- 1500W
Winch Accelerator by two batteries to quickly improve the speed efficiency,Applicable to extreme off-road competition Features and Installation Instructions: ★★ 1， three working modes： 1) Automatic mode by signal: Switch OFF (led is off): winch OUT 12v (led stays off) and winch IN at 24V (led comes on) by signal 2)Manual mode: Switch ON (led is light): OUT put constant 24 volts (led stays on) 3)12V mode: Switch OFF (led is off) No signal to terminal 1 (led is off all times): OUT put constant 12 volts. The main battery is charged at all times, the auxiliary battery is ONLY charged when output 12V(led off). Warning!! During 24V winching, auxiliary battery is NOT charged.! It is NOT recommended to let the winch run on 24V during winching OUT or at NO LOAD situations! This can cause winch motor damage due to over speeding the motor (high RPM's). 2, Mounting and wiring instructions: 1) Connect the solenoid thin -ve/earth cable ONLY to small terminal-4. 2) Winch IN signal wire from winch solenoid +ve from terminal -2,not from main battery +ve. 3) Try to let two battery shunt-wound to charged by vehicle dynamo in time. This is when the switch and the led on the booster is OFF, Output 12V. During 24V winching and when the switch and the led is ON, auxiliary battery is NOT charged. 4) mounting booster by bars at cool position and let all screws tightly 5) Max output 500A,over size 20X10X8cm,3kg.
