All Categories
*POWER SUPPLY IS NOT INCLUDED* AntMiner Z9 Mini Specifications: 1. Hash Rate: 10,000 Sol/s ±5% 2. Power Consumption: 266W ±7% (at the wall, with Bitmain PSU, 93% efficiency, 25C ambient temp) 3. Power Efficiency: 26.6J/Ksol±5% (at the wall, with Bitmain PSU, 93% efficiency, 25°C ambient temp) 4. Rated Voltage: 11.60 ~13.00V 5. ASIC Chips: 12 6. Dimensions: 206mm(L)*124mm(W)*155mm(H) 7. Cooling: 1x 12038 fans 8. Network Connection: Ethernet (network cable not included) Please note the following: 1. Due to the nature of these products, there are higher than normal restocking fees (usually 40%). The restocking fees are typically waived in the event that there is a provable failure within the first 30 days and the warranty has not been voided by overclocking or abuse. In the event that you experience a failure, please reach out to the seller immediately so that we can begin troubleshooting with you and/or processing a return. 2. Each AntMiner Z9 Mini requires FOUR 6-pin PCI-e connectors for 12V DC input (must be very stable power source). There are three hash boards that each require ONE 6-pin PCI-e power connectors and one additional 6-pin PCI-e power connector on the controller. All FOUR 6-pin PCI-e power connectors are required. Do not connect more than one PSU to the same hash board to prevent possible damage and instability. 3. Power consumption figures will vary with your PSU's efficiency, the ambient operating temperature and the accuracy of the power meter. 4. Power supply unit is not included. Bitmain recommends the APW3++ or APW7 for the AntMiner Z9 Mini. 5. Very LOUD! Sounds like a whiny vacuum. 6. Metal clanking or rattling is expected when moving the AntMiner Z9 Mini. The sound is from the hashing boards moving back and forth against the metal frame. This does not mean there are loose parts and does not mean the item is defective.