AMOGOT Metal Steel M1 Pinion Gear Sets 26T 27T 28T 29T 30T 5mm Shaft Motor Gears with Hex Key for 1/10 RC Brushless Brush Motor

Pay with

About AMOGOT Metal Steel M1 Pinion Gear Sets 26T 27T 28T

Description: Metal steel to increased wear resistance and improve fatigue life Nitrided to enhanced hardness corrosion resistance Tooth count: 26T 27T 28T 29T 30T Tooth pitch: Mod 1 pitch length: 14mm For shaft: 5mm Package include: 1 X Mod 1 pitch 26T pinion gear 1 X Mod 1 pitch 27T pinion gear 1 X Mod 1 pitch 28T pinion gear 1 X Mod 1 pitch 29T pinion gear 1 X Mod 1 pitch 30T pinion gear 5X Screws 1 X Hex Key Make sure you thread lock the grub screw. They are hard to find when they fall out. Larger gears will result in higher speeds while smaller gears provide more torque. For quicker acceleration go for a smaller pinion gear (with fewer teeth) and larger spur gear (with more teeth). Your car will accelerate off the mark very quickly with more torque, and you'll also benefit from cooler running temperatures, extending the life of your motor and ESC. How to install the pinion gear: You will probably need to loosen the motor a bit, in order to fit the pinion gear on. Make sure you lock it in place on the flat portion of the motor shaft. When you are tightening it back up, make sure you leave about a gap between the pinion gear and the spur gear. That gap will be very small. It should be about the thickness of a piece of paper.