We specialize in hard to find items
All Categories
Amflo 545HR-RET Manual Hose Reel With 200 PSI 3/8" x 75' Polyurethane Gold Air Hose With Dual Output Fittings
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
About Amflo 545HR-RET Manual Hose Reel With 200 PSI
The Amflo 545HR-RET manual hose reel with gold polyurethane air hose is a fully-assembled manual air hose reel that serves as a connection point for pneumatic tools when the attached hose is connected to a remote compressed air source. The hose is 75 ft. long, has a 3/8" inside diameter (ID), and is made of polyurethane, which has non-marring characteristics and provides resistance to weathering, abrasion, oil, and kinks. It functions effectively at temperatures ranging from -40 to +160 degrees F, and has a maximum pressure rating of 200 pounds per square inch (psi). The reel, constructed of steel components, can be mounted on a wall, floor, or ceiling to provide a convenient location for pneumatic tool connections. This assembly comes equipped with two factory-installed brass male National Pipe Thread Taper (NPT) fittings, an attached brass industrial interchange connector and bend restrictor on the hose end, and two attached brass industrial interchange couplings on the reel for tool connections. This hose and reel assembly is suitable for commercial and industrial applications, such as roofing, where the compressed air source is located remotely from the work area.Industrial hoses transfer or convey air or liquid in hose systems. When selecting industrial hoses, use the STAMPED method: S = Size (ID, OD, and length) T = Temperature (maximum and minimum temperatures of material being transported) A = Application (industry or process) M = Material (to be conveyed, type and concentration) P = Pressure (maximum working pressure) E = Ends (type of end connectors or couplings on hose) D = Delivery method (volume and velocity)The inside diameter of the hose must be adequate to keep pressure loss to a minimum and avoid damage to the hose due to heat generation or excessive turbulence. The hose must be cap
