We specialize in hard to find items
(1)
ACROBOTIC 0.96" Full Color SPI 96×64 OLED LCD Display Module for Arduino, ESP8266, MSP420, STM32, 8051, Raspberry Pi LED Screen SSD1331 16-bit Color
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
About ACROBOTIC 0.96" Full Color SPI 96×64 OLED LCD
These displays are small, only about 1in diagonal, but very readable due to the high contrast of an OLED display. This display is made of 96x64 individual OLED pixels, each one is turned on or off by the controller chip. The pixels can display any of 65,536 (16-bit) color beautifully. Because the display makes its own light, no backlight is required. This reduces the power required to run the OLED and is why the display has such high contrast; we really like this miniature display for its crispness!This breakout can be used with a standard 3-wire SPI (Data, Clock, Chip Select) interface. The design is completely 5V-ready, with an onboard regulator and built in boost converter. It's easier than ever to connect directly to your 3.3V or 5V microcontroller or single board computer!Features:Size: 0.96inResolution: 96×64pixelsViewing angle: greater than 160degPower: 0.04W (low-power mode)Input voltage: 3.3V~5VDCWorking temperature: –30~80°CSize: 27mm×27mm×4.1mmDriver IC: SSD1306Communication: SPIBacklight: OLED self-lit (no backlight)Pixel Color: Full Color (16-bit)We have written useful guides for getting you started with these OLED screens:ESP8266: http://learn.acrobotic.com/tutorials/post/esp8266-oled-display-using-spi
