All Categories
How to install your bidet toilet sprayer? Answer: Please refer following installation step. 1. Turn off water feed 2. Disconnect toilet hose from flush tank 3. Connect T-adapter to flush tank 4. Connect toilet hose to T-adapter 5. Connect other end of shower hose to sprayer 6. Turn water feed back on 7. Screw wall bracket to wall or screw bracket to hook then mount on the tank Note: 1. When installing this unit be sure that the water supply valve by your toilet is fully turned off and that there is no flow/leak of water before removing any plumbing components from your toilet. Failure to do so could result in flooding and water damage. 2. Strongly recommend that keep the valve closed if you do not use the sprayer. Failure to turn off after each use may cause flooding and water damage. Specification: Type: Bidet Sprayer KitMaterial: Sprayer: 304 stainless steelHose: Stainless steel, chromeplate brass headValve: Chromeplate brassColor: SilverPressure: 20-80psiSprayer Head Connector Diameter: 20mm / 0. 8"Sprayer Size: 12. 5*6. 6*2. 5cm / 4. 9*2. 6*1" (L*W*H)Net Weight: 0. 68kg / 24ozHave many other usage mode for Bidet Sprayer Kit: - Cloth diaper cleaning, feminine hygiene, toilet cleaning, as a bidet sprayer- Cleaning potty seat bowlDon't get stuck with a cheaper, leaking diaper sprayer - pick one up now and let us show you how easy it is to use