All Categories
The valve replaces the traditional float valve and can replace various systems such as high water tanks, pools, industrial water towers and civil buildings. Automatic control, low self-replenishment, automatic stop of water output Four water inlets, a lot of water Beautiful appearance, small size, practical, simple installation No electricity, easy to use, long life, low failure rate, and cost savings Working pressure range: 1-10KG (0.1-1MPa) Applicable medium: clean water Applicable medium temperature: ≤70 ° High temperature medium temperature: -10 ° ~ 70 ° A When the water level of the pool or water tank drops, the valve body will sink, and then open the pilot valve of the control valve. Due to the influence of the pipeline water pressure, the sealing surface of the control valve will open. Eventually the water came out and vice versa. A note: This product is a liquid level control valve. After installation, the float must be vertical. If you need to install from the top, you need an elbow to connect the float valve and the inlet line. First, fix the water inlet pipeline on a horizontal surface, and then connect the automatic water level control valve to the water inlet according to the standard. The main water inlet should be aligned with the normal diameter of the control valve. When in use, the final valve should be fully opened. If two valves are installed in the same tank, they should be kept in the same level. Before installation, please clean the impurities in the pipeline to prevent blockage. If the water quality is not good, the valve needs to be properly maintained. If the user finds that the time for adding water becomes longer, he can upload the water inlet and rinse A Quantity: 1 note: Due to manual measurement, please allow 1-3mm error. Please make sure you do n’t mind the intention to reset Due to the differences between different monitors, th