We specialize in hard to find items
All Categories
3/4" Brass Electric Solenoid Valve 12V DC NPT Normally Open Air Gas Water Viton
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
About 3/4" Brass Electric Solenoid Valve 12V DC NPT
U.S. Solid normally open (N/O) electric solenoid valve is constructed with a durable brass body, three-quarter inch (3/4") female threaded (NPT) connections, and VITON gasket. Suitable for use with hot or cold water, natural gas, air, very low viscosity fluids (< 20 cst) and gasoline or other petroleum based liquids. Customers chose this general purpose valve for supplemental gas tanks, sprinkler systems, and more. Can not be used in strong acid, strong base, waste water, industrial gas and other media containing many impurities. Suitable for outdoor use; not for use underwater. Brand: U.S. Solid Model: USS2-00025 Size: 3/4" Flow Aperture: 20 mm Body Material: Brass Gasket / Diaphragm / Seal: VITON Rated voltage: DC 12 V, ± 10% Current: 1.667 A Power rating: 20 W Operation Type: Semi-direct lift valve Operation Mode: Normally open Operational pressure range: 0 to 101 PSI / 0-0.7 Mpa (for Air, Water); 0 to 72 PSI / 0-0.5 Mpa (for Oil) Flow capacity: 7.6 gallons per minute (GPM) of water at 60oF with a pressure drop of 1 PSI Flow value: 7.6 Cv Minimum operational temperature: 14 degrees Fahrenheit (-10 degrees Celsius) Maximum operational temperature: 248 degrees Fahrenheit (120 degrees Celsius) Suitable Media: Air, water, oil, natural gas, diesel fuel, kerosene etc. OVERHEATING WARNING: Not designed for continuous operation(not a 100% duty cycle). While energized, under normal operating conditions, solenoid valve will get HOT. The coil will reach a maximum temperature of about 80℃. It is fully complied with national standard: JB/T7352-2010. If energized continuously for more than 8h the coil may burn.
