We specialize in hard to find items
All Categories
3/4/6 Axis Mach3 USB CNC Engraving Machine Controller Board Stepper Motor Control Card Smooth Motion USB Breakout Board(3 Axis)
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
About 3/4/6 Axis Mach3 USB CNC Engraving Machine
Features: The pulse output frequency is up to 500 KHz, and can be connected to the servo/ step. The motion control buffer size can be set, the fastest interpolation period can be guaranteed to be stable, and the computer can operate stably even when the running load of the computer is overweight. It has a 16-way isolation input port, the input interface is simpler, the dry and dry contact of the port can be both, the wiring is simpler, the dry contact method can only be externally connected with a physical switch to the ground wire, and all the 16-way input port have the signal indication, and the indicator light is on when the low level is low, and the debugging is simple and clear. Up to 24 output port (with 8-way, RS485 extension), 32-way input (with 16-way input, RS485 can be extended for 16-way).The PWM speed-regulating output port (isolated) can set the PWM frequency and the duty ratio of 0-1000 is continuously adjustable With the NVRAM space of 256 bytes, the coordinate value and the processing line number of the 6 axes can be saved, and the next power-on does not need to be found. The output of all the motion axes is a differential signal, which can be connected with a servo high-speed signal input port. RS485 isolation bus, external input/ output or ground servo read position, grounding ruler, etc. (need to be customized and developed) All input and output is isolated from the motion control core, and the pulse isolation uses high-speed 10M optical coupling isolation. Single double pulse mode is supported The upgrade is convenient, and the firmware of the upgrade hardware layer of the product is only brushed with the USB, the firmware is open, the test can be tested for 1 hour, and the hardware layer firmware can be shut down for more than 1 hour. Package list: 1 * control board 1 * cable 1 * fixed bracket 2 * screw
