1X30 inch Assorted Belt Kit with Super Strop Leather Honing Polishing Belt Buffing Compound Included

Pay with

About 1X30 Inch Assorted Belt Kit With Super Strop

1X30 Assorted Belt Kit with Super Strop Leather Stropping belt for powered Belt Sanders. A 1" X 30" leather Honing strop, when used properly with our Made in USA Buffing Compound can leave an incredible mirror polish finish on your knife's edge along with razor sharpness. You can also do it in a fraction of the time compared to hand stropping. When stropping a knife with a Super Strop, remember to use light pressure and allow the belt to do the work. Move the knife at the same speed you would if you were sharpening with an abrasive belt. The 1X30 in. Super Strop works fast! Make just 2 passes, at a slightly lower angle, on both sides of the knife and check for the burr and test your sharpness. Depending on what grit progression you used, more stropping may be necessary. Super Strops are quality leather belts for stropping with belt sanders. The 1X30 Leather Honing Strop Belt will not only polish your knife’s edge to a fine finish, it will do a superior job of removing the final burr that was created while sharpening. Super Strop Leather Strops are made for 1X30 Belt sanders like the Harbor Freight, Wen, Rikon, Craftsman, Central Machinery and virtually any belt sander that accepts 1x30 inch sanding or sharpening belts. A 1x30 Belt Sander can make a fast and convenient knife sharpener, and you don’t have to stop there. Sharpen knives, tools, chisels, Mower Blades and so much more. Your leather belt may seem a little small when you install the strop on your 1x30 belt sander for the first time. The leather strop belts are made slightly shorter than traditional 1x30 sharpening belts to compensate for stretching over time. Once installed, your belt sander is a stropping machine. After applying a thin layer of sharpening Compound to your leather strop, you can begin stropping your blade on your 1x30 belt sander. You must strop Edge Trailing. Most belt sander’s belts travel down. Keep your knife edge pointed in the same directions the leather honing belt is traveling.