We specialize in hard to find items
(2)
1" NPT Brass Electric Solenoid Valve 110V AC Normally Closed NBR from U.S. SOLID
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
About 1" NPT Brass Electric Solenoid Valve 110V AC
U. S. Solid Normally Closed Electric Solenoid Valve; 1"ports, brass body, NBR seal, 110 volt AC, for air, water, or inert gases. U. S. Solid normally closed (N/C) electric solenoid valve is constructed with a durable brass body, two-way inlet and outlet ports with one inch (1") female threaded (NPT) connections, and strong NBR gasket. The coil uses alternating current and energizes at 110 volts AC; voltage range + or - 10%. 18 Watt power rating. Semi-direct lift valve operates from 0 PSI to a maximum pressure of 145 PSI (0 MPa to 1.0 MPa). Operational pressure range for water: 0 to 101 PSI; for oil: 0 to 72 PSI; for air or gases: 0 to 101 PSI. 1" (25 mm) flow aperture permits a unidirectional flow capacity of 12 gallons per minute (GPM) of water at 60° F with a pressure drop of 1 PSI (12 CV). Operational temperature range is 14 to 176 degrees Fahrenheit; -10 to +80 degrees Celsius. Suitable for outdoor use; not for use underwater. Suitable for use with hot or cold water, gas, air, very low viscosity fluids (< 20 cst). Not for use with gasoline, kerosene, or other petroleum based substances. Will lead to product malfunction if used. Customers chose this general purpose valve for showers, irrigation systems, fish tanks, and a variety of other uses. This solenoid valve is not to be used continuously for more than eight hours. It can result in the valve overheating. Do not use corrosive materials in the valve, including, but not limited to, gasoline, diesel fuel, etc. Manufactured in China. Model: USS2-00014. Quality assurance and/or conformity managed in accordance with standards: ISO 9001:2000; GB/T 19001:2000; European EN61000-6-1:2001 and EN61000-6-3:2001.
