All Categories
Installation Instructions:■Step 1 - Wipe down and clean the entire countertop with your choice of cleaner and do a final wipe down with rubbing alcohol. ■Step 2 - Measure and cut out the length of contact paper you need. If the width is not enough, don't worry, you can later overlap and cover the remaining area. ■Step 3 - Slowly peel the backing little by little with one hand and smooth out the bubbles with the credit card as you go. If there is too much air trapped you can always lift the contact paper back up and smooth it again.■Step 4 - Repeat the process for any other areas that were not covered. Just overlap the contact paper slightly on the edges. You might have to roughly match up the pattern. ■Step 5 - Use the precision knife to cut excess. ■Step 6 - Admire your beautiful "new" countertops. Tips■Sometimes the backing paper may be partially separated. This is because it is subdivided into small rolls from large rolls.Since the backing paper is removed when attaching, it does not interfere with the use of the product. ■ If the model number are the same, The color and pattern are same. However, this picture can be expressed differently because of the shooting conditions.■ Even though they have the same model number, there may be a color difference depending on the production LOT. ■ Since computer screens have chromatic aberration we can not guarantee that the color of our products will be exactly the same with the photographs.