We specialize in hard to find items
All Categories
151 Kalrez Perfluoroelastomer O-Ring, 6375 Compound, 75A Durometer, Round, Black, 3" ID, 3-3/16" OD, 3/32" Width (Pack of 1)
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
About 151 Kalrez Perfluoroelastomer O-Ring, 6375
This O-ring is made of black Kalrez 6375 (perfluoroelastomer) and has a durometer of 75A. It has a round cross-section and can be used across a wide temperature range (27 degrees F/-2.8 degrees C to 527 degrees F/275 degrees C). Designed for use in a wide variety of sealing applications, this Kalrez O-ring meets standards defined by Aerospace Standard AS568A, which is the Aerospace Size Standard for O-rings. Kalrez 6375 has low compression set and excellent resistance to many reactive gases, plasmas, alkalis, acids and solvents. It performs well in mixed streams, mechanical applications, under temperature cycling, in steam and hot air, and exhibits low swell in acids, and aldehydes. DuPont manufactures Kalrez in facilities that are ISO 9000 and AS 9100 registered. The durometer hardness of this Kalrez O-ring is 75A. Durometers measure the hardness of a material and its resistance to permanent indentation. A higher durometer value indicates greater resistance to indentation. On a scale of 0 to 100, a value of 0 indicates that a sample was completely penetrated, while a value of 100 shows no indentation in the sample. The letter following the number identifies the shore scale, which is either shore A or D. Shore A is used for softer plastics, while shore D is used for harder plastics. O-rings provide a pressure and fluid seal between cylindrically shaped, overlapping mating surfaces and are commonly seen in engines, faucets, flanges, valves, and various cylinders. They are circular in shape, with a round cross section, and a hole in the center, similar to a doughnut. O-rings are available in various AS568A dash sizes, which is the standardized sizing for O-rings, and defines the nominal inside diameter (ID), outer diameter (OD), and cross-sectional (CS) diameter of an O-ring.
