DALY BMS Parallel Module 1A with Smart BMS LiFePo4 16S 48V 250A Cooling Fan and CAN Port Smart BMS Bluetooth Dongle for Rated 3.2V Lithium Battery Packs Inverter UPS and Home Storage System

Pay with

DALY BMS Parallel Module 1A with Smart BMS LiFePo4 Features

• Unique Protection ----Daly parallel module+daly bms is specially designed for lithium packs in parallel ,it’s an integrated combined customized parallel packs protector. This combination can do limitation to mutual high charging current caused by internal resistance and voltage difference between the parallel lithium battery packs while the parallel packs are charging. With daly bms +daly parallel module,higher voltage for electricity appliance is attainable safely and easily.

• Usage Notice---Daly bms +daly parallel module cannot be used separately, types and strings of the bms +parallel module,battery packs must be exactly the SAME!! For example,(Rated 3.2V lifepo4 4S 12V 280ah[capacity can be vary a little bit like 280AH+120AH] battery packs) +(daly smart bms lifepo4 4S 12V 100A+daly 1A parallel module) is workable; Daly parallel module cannot be compatible with other brand of bms neither the daly bms you bought previously or separately !

• Basic Parameters--- all the 1A parallel module dimension in this link is the same: 63*41*14mm, bms dimension refer to the listing page, current limitation:1A; Parallel module will be triggered by: 1- reach to overcharging current point at warning level 2 , or 2-reach to built in/pre-set valve value .Working temperature range: -20℃~70℃. parallel module release condition: Discharge. Communication Wire: 22AWG, length=300mm

• Smart and easy wiring--- all the bms with UART+RS485 +CAN function and protocol, with bluetooth dongle and daly bms app , you can check all real time battery parameters and do proper settings in certain range. Do not connect the parallel module with the bms before all balance leads wiring each battery cell. Please connect BMS to battery first, and then connect parallel module to BMS.

• Each Package--- smart bms with CAN communication function +Balance wire+NTC +Bluetooth Module+1A matched parallel module+Communication Wire. And this bms+parallel module is customized , each purchasement quantity should be at least 2 sets !!

About DALY BMS Parallel Module 1A With Smart BMS LiFePo4

This BMS can be connected in parallel. Each BMS is matched with a 1A parallel module. It can limit the large current between PACK due to internal resistance and voltage difference when battery PACK is connected in parallel and effectively ensure the safety of the battery and the BMS. Please connect the battery pack, BMS, and parallel modules in order. Incorrect connection order will damage the BMS and battery. The order is: 1-Connect the balance wire to each string of batteries. 2-Plug the balance wire into the BMS. 3-Connect the parallel module after plugging the communication line into the DO port of the BMS When choosing a BMS, make sure that the type of battery and the number of strings are consistent with the BMS. Dimension：63*41*14mm Current limiting：1A Operating temperature：-20~70℃ Package：Smart bms with CAN communication function +Balance wire+NTC +Bluetooth Module+1A matched parallel module+Communication Wire If you have any questions, please leave us a message. Welcome to the DALY BMS only official store DalyElec to buy.