Pipe Blockage Detector, 30M/98ft Pipeline Magnetic Detector Water Pipe Locator Underground Pipeline Blocking Clogging Scanner Tool with Waterproof Probe and Headset

Pay with

Pipe Blockage Detector, 30M/98ft Pipeline Magnetic Features

• Wide Application: This pipe detector can be used to detect wall studs, metal pipes, PVC pipes and even water pipes. Widely used in interior decoration, home installation and other industries, allowing various construction safely proceed.

• Sensitive and Waterproof: This pipe blockage detector has a waterproof probe, which can still accurately detect blockage in an environment with water and respond quickly, according to the actual measurement situation, you can properly adjust the sensitivity to make the detection more accurate.

• High Efficiency: This pipe blockage detector using the principle of electromagnetic induction and a sensitive sensor head can precisely locate the blockage, which greatly improves efficiency, reduces disassembly area and reduces costs.

• Strong Signal Penetration: The signal of this pipe blockage detector can pass under the concrete wall/floor of 15.7inch thickness, which can precisely locate the pipe blockage and reduce the removal area, the signal wire is very soft, wear-resistant, not easy to break, smooth, and easy to cross the curves.

• Humanized and Thoughtful Design: This pipe blockage detector has many humanized and thoughtful designs, such as the probe self-test function, automatic shutdown function, low battery reminder function, etc., which are very thoughtful.

About Pipe Blockage Detector, 30M/98ft Pipeline Magnetic

DescriptionAre you still wasting a lot of time because your pipes are clogged but you can't find the blockage? This pipe blockage detector uses the principle of electromagnetic induction, the transmitter probe emits electromagnetic waves, and the receiver receives electromagnetic waves to accurately find the blockage. It is suitable for various scenarios where the pipes are clogged due to various reasons.DetailsHorn Design: When closer to the blockage, the sound from the horn will be louder and clearer to remind you. Depending on the distance from the blockage, the sound will also vary.Wheel Design: The signal line can be easily tucked into the wheel organizer. This type of wheel design will save you a lot of effort and won't get your hands dirty.Anti-slip Grip: Both the transmitter and receiver have anti-slip grips, which can effectively prevent slippage during operation and facilitate use.Headset: This pipe blockage detector comes with a headset that you can use in noisy environments or long-distance detection which is very thoughtfulStorage Bag: Our pipe blockage detector comes with a storage bag, you can put the detector and accessories together in the storage bag which is very convenient to carry.SpecificationStyle: Simple, ModernMaterial: ABSColor: RedStandby Time: 7-8 HoursTransmitter Battery Capacity: 2600mAhReceiver Battery Capacity: 1400mAhSensable Wall Thickness: 40cm/15.7inchSignal Line Length: 30m/98.43ftTransmitter Size: 30*36*4.5cm/11.81*14.17*1.77inReceiver Size: 36*6.5*4cm/14.17*2.56*1.57inPackage Size: 40.2*36.5*8.4cm/15.83*14.37*3.31inNet Weight: 2.4kg/5.29lbsGross Weight: 2.5kg/5.51lbsHow to Use1. Pass the signal line and transmitter head into the pipe until the signal line can not advance, at this time the position of the probe is the blockage position!2. Open the signal transmitter power switch, the red light indicator lights up!3. Turn on the signal receiver switch, and then take the signal receiver to detect along the general direction. If close to the probe in the pipe, the horn will sound. The loudest place is the blockage point. Make a mark, pull out the signal line, and then chisel the ground to deal with blockage!4. If in the test, the green light flashes, indicating that the power is insufficient, please charge in time.Package Included1* Pipe Blockage Emitter1* Pipe Blockage Receiver1* Charging Cable1* Headphone1 Box* Probe Accessories1* Storage Bag1* English ManualNotes1.Please be aware to lift the instrument with your left hand and turn the hub forward/reverse with your right hand to dispense and rewind the wire. Do not pull the signal wire by force, otherwise this may cause the signal cable to be stuck or torn off.2.Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.