We specialize in hard to find items
All Categories
Robelle 1420M Chlorine Tabs Pool Sanitizer, 20-Pounds
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
Robelle 1420M Chlorine Tabs Pool Sanitizer, 20-Pounds Features
-
Sanitizer, clarifier, stain inhibitor, algae control, descaler, sunlight protector all in one slow-dissolving tab
-
2 tablets per 10,000 gallons of water
-
Maintain the pH at 7.4-7.6 and total alkalinity at 80-130 ppm
-
All-in-1 swimming pool chlorinating tabs for routine use in automatic chemical feeders or floaters
-
94.05% Trichloro-S-Triazinetrione (84.65% available chlorine)
-
Reduces the need for additional chemicals
-
Each individually wrapped tab weighs 8 ounces
-
20 pound container (40 tabs)
About Robelle 1420M Chlorine Tabs Pool Sanitizer, 20-Pounds
Pool sanitization with 3 Inch Tablets. For use in feeders or floaters. Kills bacteria and controls algae, clarifies, prevents metal staining and corrosion, and reduces scale formation. A) Important Notes: 1. Shock your pool every week. 2. Sunlight, rainfall, temperature, number of swimmers and frequency of pool use affect the rate of chlorine residual loss. Adjust cleaning and chemical maintenance accordingly. 3. Use this product in an automatic feeder or floater. 4. Do not add other chemicals into the feeder or floater where this product. 5. To avoid damage to pool surface or materials do not allow product to come in direct contact. Do not throw tablets directly into pool. B) Before your begin: 1. Ensure all pool equipment is working. Adjust stabilizer levels to 40-100 ppm with a Stabilizer. 2. Test the water's pH, alkalinity, and calcium hardness and adjust to the correct level. Adjust pH to 7.4 - 7.6. 3. Check the free available chlorine level and adjust to 2-4 ppm by adding a granular chlorinating product. C) Start-Up: 1. If water is cloudy or green, superchlorinate pool with appropriate shock product until pool is clear. 2. Add 16 ounces of this product per 10,000 gallons of pool water to feeder or floater and then test for the free available chlorine level (allow water to circulate at least 4 hours before testing). Adjust the feeder or floater following manufacturer's instructions to establish a free available chlorine level between 2-4 ppm. 3. When free available chlorine level is adjusted to 2-4 ppm, add an algaecide. D) Maintenance: Add 16 ounces of this product per 10,000 gallons of pool water per week, or as often as needed, to the feeder or floater to maintain a constant free available chlorine level of 2-4 ppm. Reentry into treated swimming pools is prohibited when free available chlorine levels are above 3 ppm due to risk of bodily injury.
