YUCHENGTECH Lengthened Type Four Side Wet Film Coating Applicator Wet Film Coater Applicator Wet Film Coating Device Film Applicators Wet Film Width 160mm (50μm,75μm,100μm,125μm)

Pay with

YUCHENGTECH Lengthened Type Four Side Wet Film Features

• 1.【High-quality material】◈ The four side wet film applicator is made of high-quality stainless steel, wear-resistant, anti-rust, durable, and has a strong structure.

• 2.【Fine processing】◈ The four side wet film applicator has fine workmanship,the surface is polished,smooth surface,with uniform coating and high precision.

• 3.【Features】◈ The four side wet film applicator is compact in design and easy to operate. A wet film applicator has four different coating film thicknesses,with high efficiency and cost saving. It is easy to clean and maintain.

• 4.【Main parameters】◈ Coating thickness: 50μm,75μm,100μm,125μm;Coating width: 160mm;Total length: 190 mm.

• 5.【Application】◈ The four side wet film applicator is mainly used in routine quality control and research experiments for coating the wet film with specified thickness to determine the covering power, color or sample preparation of samples.

About YUCHENGTECH Lengthened Type Four Side Wet Film

Features: 1. A flexible and easy to use applicator, combining four gaps size in one unit. 2. The cylindrical shape provides excellent results particularly on firm substrates and smooth surface. 3. By simply rotation through 90 angles, the next gap size is placed onto the test surface. 4. For any test performed on this coating, the sample must be uniform, comparable, and precise in thickness control.It is suitable for low-viscosity water-based, acidic and alkaline products. 5. In order to meet such specific demands we have a wide range of high quality, high precision film applicators and motorized film applicators for greater repeatability when undertaking a large number of sample tests. Parameter: Coating thickness:50μm,75μm,100μm,125μm Coating width: 160 mm Total length: 190 mm Weight: 0.5kg Instructions: 1.Place the template on the platform, fix it, and do not move when the applicator slides over. 2.According to the required wet film thickness, select the applicator and place it on the short side of the sample plate, close to the parallel or specified position. 3.Then pour about 5ml of sample in front of the applicator, press the two ends of the applicator with your fingers, and slide at the speed of 150 mm / s, that is, coating the wet film with the required thickness. 4.After use, wash and wipe dry with solvent, and coat oil on the surface. Note: In order to get better test result, please operate on smooth surface when using.