We specialize in hard to find items
All Categories
DWEII VL53L0X Time-of-Flight Flight Distance Measurement Sensor Breakout VL53L0X ToF Laser Range Finder Pack of 4
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
- Cash On Delivery/Cash Upon Pickup Available
DWEII VL53L0X Time-of-Flight Flight Distance Features
-
❃❃The VL53L0X is a great IC, but its small, leadless, LGA package makes it difficult for the typical student or hobbyist to use.
-
❃❃Working Voltage: 2.6V - 5.5V; Maximum Sensoring Distance: 2m
-
❃❃A time-of-flight ranging system integrated into a compact module ;Ranging measurements are available through the sensors I²C (TWI) interface, which is also used to configure sensor settings, and the sensor provides two additional pins: a shutdown input and an interrupt output.
-
❃❃Range from ±3% at best to over ±10% in less optimal conditions
-
❃❃ you will get 4pcs VL53L0X Time-of-Flight (ToF) Laser Ranging Sensor Breakout
About DWEII VL53L0X Time-of-Flight Flight Distance
PIN Description VDD Regulated 2.8 V output. Almost 150 mA is available to power external components. (If you want to bypass the internal regulator, you can instead use this pin as a 2.8 V input with VIN disconnected.) VIN This is the main 2.6 V to 5.5 V power supply connection. The SCL and SDA level shifters pull the I²C lines high to this level. GND The ground (0 V) connection for your power supply. Your I²C control source must also share a common ground with this board. SDA Level-shifted I²C data line: HIGH is VIN, LOW is 0 V SCL Level-shifted I²C clock line: HIGH is VIN, LOW is 0 V XSHUT This pin is an active-low shutdown input; the board pulls it up to VDD to enable the sensor by default. Driving this pin low puts the sensor into hardware standby. This input is not level-shifted. Package included: 4* VL53L0X Time-of-Flight Flight Distance Measurement Sensor Breakout
