CTBAIER ELP88 for EPSON ELPLP88 powerLite Home Cinema Epson 1040 2040 2045 740HD 640 VS240 VS345 VS340 EX3240 EX7240 EX9200 EX5250 EX5240 EB-97H V13H010L88 Replacement Projector Lamp Bulb

Pay with

About CTBAIER ELP88 For EPSON ELPLP88 PowerLite Home

This is a high quality projector wick, high brightness, long life, excellent visual effects, so that you can experience the same hd images as the cinema at home. Bulb model: ELPLP88//V13H010L88 Working hours :3000-4000 hours Warranty period :200 days Bulb type: Projector Lamp Bulb with housing Applicable model:For epson ELPLP88 powerlite home cinema EPSON 1040 2040 2045 740HD 640 VS240 VS345 VS340 EX3240 EX7240 EX9200 EX5250 EX5240 EB-97H EB-945H EB-98H EB-965H EB-955WH EB-S04 EB-S27 EB-S29 EB-S31 EB-U04 EB-U32 EB-W04 TW5210 When to change projector bulbs: When the projector indicator light flashes orange, the projected image becomes darker or blurrier than before.When the projector is on, the message to change the light bulb will appear on the screen. In order to get a good projection effect, it is recommended that you change the light bulb. How to replace projector bulbs: 1. Turn off the projector and unplug the power cord 2. Let the projector cool for at least an hour. The bulb is very hot after use 3. Use a screwdriver to remove the screws from the lid and slide the lampshade open Loosen the two screws holding the bulb in place 5. Hold the bulb and pull it out straight 6. Use the opposite steps to place the new bulb back in the projector and tighten the screws 7. Reinstall the lampshade and reset the life of the bulb 8. Installation is complete Note: 1. Before purchase, please confirm that the bulb of this projector is compatible with the projector. If you cannot find the model of the projector on the page, please contact us 2. To avoid burns, allow the projector to cool for at least 60 minutes before changing the bulb