Condenser Microphone Kit, Professional Studio Condenser Microphone Set BM-800 Mic Kit with Adjustable Pop Filter & Anti Shock Mount for Studio Recording & Broadcasting

Pay with

About Condenser Microphone Kit, Professional Studio

Instructions: 1. When using, the volume control of the loudspeaker or mixer should be adjusted to the minimum, and then the phantom power should be connected with the microphone, and then the switch of the phantom power should be turned on, and the volume should be adjusted slowly from the minimum to the maximum to avoid the impact of the loudspeaker 2. Cover the microphone with your hand, or make the microphone close to the speaker, which may produce a whistle. 3. The microphone is highly sensitive, and attention must be paid not to drop or give strong impact. 4. The microphone should be stored in a clean place when using, and avoid storage or use in a place with high temperature and humidity, so as not to affect sensitivity and timbre. Specification: Material: Stainless steel & Plastic Pickup Pattern: Unidirectional Frequency Response: 20Hz-20kHz Sensitivity: -34dB±2dB(0dB-1V/Pa at 1kHz) Output Impedance: 150Ω±30%（at 1kHz) Load Impedance: ≥1000Ω Max SPL: 130dB(at 1kHz≤1%T.H.D) SNR: 70 db Powering: 3mA Microphone Size(Height*Diameter): Approx. 15 * 4.6 cm / 5.9 * 1.8 inch Diameter of Pop Filter: Approx. 15.5 cm / 6.1 inch Diameter of Anti-shake Mount: Approx. 10 cm / 3.93 inch Folded Arm Stand Length: Approx. 37 cm / 14.5 inch Weight: Approx. 1375 g Package Included: 1 * Condenser Microphone 1 * Arm Stand 1 * Pop Filter 1 * Anti-shock Mount 1 * Foam Cap 1 * Cable 1 * USB Audio Adapter 1 * Clip Holder Mount