1/2 Inch Water Level Float Valve Side-Entry Built-in Embedded Float Valve, Automatic Water Level Control Valve Inside Type Float Valve for Water Level in Water Tank and Pool Upgrade (2 Pieces)

Pay with

About 1/2 Inch Water Level Float Valve Side-Entry

2 Pieces 1/2 inch float valve, side-entry built-in and built-in embedded float valve, float valve with filter for automatic control of water level in water tank and pool Specifications: Material: nylon + rubber Size: For detailed pictures, please see the picture on the left Color: as shown Working principle: When the surface of the water tower or the pool drops, the float in the valve chamber sinks. Use the hole rod to open the pilot hole of the control valve. Ascend, press the joystick to close the pilot hole, the valve cavity begins to fill with water, and then close the control valve. The sealing surface of the control valve immediately stops the water supply. note: This product is a liquid level control valve. After installation, the float must be vertical. If you need to install from the top, you need an elbow to connect the float valve and the inlet line. First, fix the water inlet pipeline on a horizontal surface, and then connect the automatic water level control valve to the water inlet according to the standard. The main water inlet should be aligned with the normal diameter of the control valve. When in use, the shut-off valve should be fully opened. If two valves are installed in the same tank, they should be kept in the same level. Before installation, please clean the impurities in the pipeline to prevent blockage. If the water quality is not good, the valve needs to be properly maintained. If the user finds that the time for adding water becomes longer, he can upload the water inlet and rinse Packing List: 2 x Water level control valve 2 x Filter 2 x PTFE tape 2 x Internal thread elbow joint