HSH-Flo 24VAC/DC 4-20ma CF8 NPT Proportional Integral Control Motorized Ball Valve (1/2 Inch)

Product ID : 51454222

---

  Share   Tweet

share more:

---

Galleon Product ID 51454222

Shipping Weight 2.49 lbs
I think this is wrong?

Model

Manufacturer HSH-Flo

Shipping Dimension 5.91 x 1.97 x 1.97 inches
I think this is wrong?

See more product information!

-

₱ 18,547

Price Tracker

+ ₱ 1,302
International Shipping

via AIR

This item ships longer than average delivery time. Click here to open chat and know how long it will take.

---

BUY NOW!

*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown

---

• Electrical items MAY be 110 volts.
• 7 Day Return Policy
• All products are genuine and original
• Cash On Delivery/Cash Upon Pickup Available

Pay with

HSH-Flo 24VAC/DC 4-20ma CF8 NPT Proportional Features

• ◎ 24VAC/DC 4-20Ma 20N.m ISO5211,F03/04/05 Standard Connection Actuator;

• ◎ Installed With 2 Way 1/2" DN15 Full Bore 1.5Mpa(217.5PSI) NPT Stainless Steel Ball Valve Body;

• ◎ Menu Can Report Real-time Failure,including Stuck Or Other Reasons Which Lead Actuator Fail To Realize Valve On/off Integrally,and Output Failure Warning Signal;

• ◎ Built-in Motor Control Module,High-Performance Brushless Motor Frequency Speed Control Can Realize Accurate Positioning, Built-in Overload Protection of Internal Motor;

• ◎ 1.3" OLED Screen,No Visual Dead Angle, Highly Bright, Energy Saving And Eco-Friendly, Real Time To Show Valve Opening Angle And External Control Command Smart Ball Valve Actuator.Enter Sleeping State Automatically After About 5 Minutes,While It Could Prompt Location State And Its Control Command At Sleeping Time.;

About HSH-Flo 24VAC/DC 4-20ma CF8 NPT Proportional

Product Overview ◎ Valve Dimension: 1/2" NPT 2 Way Full Bore Valve Body; ◎ Actuator Rated Torque: 20N.M; ◎Recomand Install Below 15N.M Valvd Body; ◎ Rated Voltage: 24VAC And DC; ◎ Control Signal: 4-20mA; ◎ Position Feedback: 4-20mA; ◎ Position Accuracy: ±1%(Set By Software); ◎ Adopted High-Performance Brushless Motor，Overload Protection of Internal Motor; ◎ It can be used 20,000 times.*1; ◎ Connection standard : ISO5211 F03、F04、F05; Electrical Data ◎Rated Voltage: AC/DC24V (AC18-28; DC18-32V); ◎ Power Consumption:15w@Running, 0.5w@Holding; ◎ Peak Current: 950mA@5ms@ Rated Voltage; ◎ Connecting Cable: 7*0.2mm 2 Cable, Voltage Withstand AC300V; ◎ Fuse: 2A; Functional Data ◎ Rated torque: 20N.m@rated voltage ◎Angle of rotation: 90±2° ◎ Max angle of rotation: 330°±5° ◎ Manual operation: ※ Matching hexagon wrench，using at no power ◎ Running time: About 10S (per 90°) ◎Continuous running: Continuous running ◎ Sound power level: Max50dB(A) ◎ Position indicator: Mechanical and screen Working conditions ◎ Electricity safety level:III Type (safety low voltage) ◎ Inflaming retarding level: V0 UL94 test method ◎ Enclosure:IP67 As Per En60529/GB4208-2008 (all directions); F type can add dehumidifying heater ◎ Insulation resistance: 100MΩ/500VDC ◎ Withstand voltage: 500VAC 1Min ◎ Medium temperature: ≤80°can install to actuator directly; ＞80° need to install bracket or heat radiation stand ◎ Indoor or outdoor; if exposed to the rain or sunshine,need to install protective device for the actuator ◎ Not explosion proof products, do not use them in flammable and explosive environment. ◎ Ambient temp: -30℃— 60℃ ◎Non-operation temp: ≤-40℃ or ≥80℃