We specialize in hard to find items
All Categories
Black Aquarium Silicone Sealant - 10.2 Fluid oz Cartridge
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
- Cash On Delivery/Cash Upon Pickup Available
Black Aquarium Silicone Sealant - 10.2 Fluid oz Features
-
This high modulus component RTV Silicone Sealant forms strong cohesive bonds to glass without the need of primers
-
The bonds are unaffected by continuous immersion in water and, when fully cured, is non-toxic to fish.
-
ASI Aquarium Silicone Sealant is a non-slump sealant and can be applied to vertical surfaces without flowing or sagging.
-
Can be applied to surface temperatures from -18°C to +50°C (0°F to +120°F) and after curing, withstands constant operating temperatures from -57°C to +233°C (-70° F to 450°F).
-
Formulated for use with fresh and salt-water aquariums or a Vivarium
About Black Aquarium Silicone Sealant - 10.2 Fluid Oz
ASI Aquarium Silicone Sealant has been specifically formulated for the fabrication of fresh and salt-water aquariums. This high modulus component RTV Silicone Sealant forms strong cohesive bonds to glass without the need of primers. The bonds are unaffected by continuous immersion in water and, when fully cured, is non-toxic to fish. ASI Aquarium Silicone Sealant is a non-slump sealant and can be applied to vertical surfaces without flowing or sagging. High Modulus Excellent tensile strength Excellent primerless adhesion to glass Bond unaffected by continuous immersion in water Excellent clarity Because ASIAquarium Silicone Sealant is a 100% silicone sealant, it has excellent resistance to weathering including ozone, ultra-violet radiation and airborne chemicals. ASI Aquarium Silicone Sealant can be applied to surface temperatures from -18°C to +50°C (0°F to +120°F) and after curing, withstands constant operating temperatures from -57°C to +233°C (-70° F to 450°F). MATERIAL PREPARATION For successful bonding, glass must be clean of all dust, dirt and oil. The presence of these contaminants may impede the development of the bond. Therefore, it is essential that the glass be cleaned with suitable and compatible cleansers such as nonoily solvents, diluted solutions of acetic acid or extremely hot water. The cleaned glass should be wiped dry immediately with a clean, lint free cloth or blown dry with hot oil free air. DO NOT clean glass with soap and water solutions. Soap residue can act as a release agent and result in adhesion failure. Clean glass should be handled with clean, lint free gloves or equivalent only. Oils from hands and fingers can act a r
