Eletechsup 8CH RS485 NPN Input Output Port Remote Control Switch PLC IO Expansion Board DIN35 Modbus RTU Module DC 12V 24V (1 x 8CH NPN only Board)

Pay with

Eletechsup 8CH RS485 NPN Input Output Port Remote Features

• Working voltage: DC 6.5-30V

• Working current: 8-50MA

• Maximum load: the maximum load current of each channel is 300MA

• Sizes (with box):85x80x30mm(8CH)

• Weight (with box): 97g (8CH)

About Eletechsup 8CH RS485 NPN Input Output Port Remote

Product Name: 8CH RS485 NPN Input Output Port Remote Control Switch PLC IO expansion Board DIN35 Modbus RTU Module DC 12V 24V Package inlcuded: DC 6-30V 8 Input & 16CH Output RS485 IO Module Description: 1. Working voltage: DC 6.5-30V (9V 12V 24V) 2. Working current: 8-50MA 3. 8 optically isolated input ports, 8 channel version can choose PNP input 4. 8 Darlington transistor outputs (ULN2803 NPN output) 5. The default command has a variety of output modes: ''open'' ''close'' ''Momentary'' ''Self-locking'' ''Interlock'' ''Delay'' 6 Commands 6. The input port can remotely control output port of another board via RS485 bus (relevant registers must be set) 7. MODBUS command 1 supports 03 06 16 function codes, MODBUS command 2 supports 01/02/03/05/06/15/16 function codes 8. The maximum delay of 1 MODBUS command is 255 seconds 9. In MODBUS command mode, up to 64 devices can be used in parallel 10. The default baud rate is 9600BPS, you can choose the baud rate by jumper: 1200/2400/4800/19200/38400/57600/115200BPS 11. Sizes (with box):85x80x30mm(8CH),130x80x30mm(16CH),173x80x30mm(24CH),215x80x30mm(32CH),293x80x30mm(48CH) 12. Weight (with box): 97g (8CH), 148g (16CH), 197g (24CH), 246g (32CH), 339g (48CH) 13. Maximum load: the maximum load current of each channel is 300MA For more information, please contact me Application： PLC IO expansion board Smart Home,Home Automation ,Wiser Home; PTC Camera Security Monitoring Identification system; IP Camera LED Lamp Drivers Automatic curtain control