We specialize in hard to find items
All Categories
ABSOK SOIC8 SOP8 Flash Chip IC CH341A USB Programmer Flash BIOS Chip USB Programmer Module SB Programmer+SOP8 Clip+Adapter
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
- Cash On Delivery/Cash Upon Pickup Available
ABSOK SOIC8 SOP8 Flash Chip IC CH341A USB Features
-
Package includes: 1 CH341A programmer, 1 SOP8 test clip, 1 8Pin to 8 Pin converter, 2 SOP8 SOP16 to 8Pin converters, 2 2.54 mm 4 Pin connectors
-
Design: It can program the SOP8 chip online, no chip with circuit board is needed, which can save people's time. The SOP8 folder can program EEPROM online without disassembling the chip, so BIOS refreshing is simpler and more efficien
-
Features: Very suitable for amateur programmers 24 and 25 series FLASH. Use dedicated CH341A chip USB. USB1.1 communication. The erase programming speed is about 2 - 3 Mbit checks per minute.The programming speed is 2 - 3 times that of ordinary ATMEGA8 series programmers
-
Application: The main purpose of the CH341A programmer is to perform backup, erasure, programming, calibration and other operations on various software. SOIC8 SOP8 test clip, used for EEPROM 24CXX / 25CXX / 93CXX online programming
-
Note: Some chips are affected by peripheral circuits, so they cannot be trimmed directly. Please check the chip location on the motherboard before buying! Due to the characteristics of the CH341A chip, the ESMT SST 25 chip can only read but not write
About ABSOK SOIC8 SOP8 Flash Chip IC CH341A USB
Note for Test Clip: 1. The test clip can basically be used with many high-power programmers. When a programmer with a protected function is encountered, the clip cannot be read at normal voltage. You need to add a 3.3V voltage How to use: Hold the chip first, and add a 3.3V voltage to the pin corresponding to the 8th pin of the chip. Generally, the 3.3V power supply has two wires, the VCC is connected to the clip, and the other wire is grounded 2. Do not forcibly press down when clamping, first open the clip and clip it from the left and right sides of the chip When disassembling, please don’t pull it out directly. First separate the clips left and right, then take them out so that they won't break the tip of the clip Products include: 1 x CH341A Programmer 1 x SOP8 Test Clip 1 x 8 Pin to 8 Pin Converter 2 x SOP8 SOP16 to 8 Pin Converter 2 x 2.54 mm 4 Pin header
