We specialize in hard to find items
All Categories
Impromech 4 Prong Zinc Plated Steel T-Nuts & Jam Nuts, HDPE Plastic Based Swivel Glide for Furniture, Tables, Cabinets, & Benches, Zinc Plated Leveler with HDPE Base for Any Surface
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
- Cash On Delivery/Cash Upon Pickup Available
Impromech 4 Prong Zinc Plated Steel T-Nuts & Jam Features
-
【 EXCELLENT QUALITY 】: Impromech Swivel Glide Levelling Feet Kit with 4 prong T- Nuts & Jam Nuts are sourced from High Quality Hardware manufacturers. We include T-nuts and Grade 5 jam nuts for a higher quality kit!
-
【 EASY INSTALLATION & UNIVERSAL FIT 】: Drill a 7/16" hole in the center of the table leg and use a hammer to tap the T-nut into place. Install jam nut on the leveller then screw the leveller into the T-nut until the desired height is obtained. Finally, a 9/16-inch wrench is used to tighten the jam nut, securely locking the leveller in place.
-
【 FLEXIBLE APPLICATIONS 】: Whether it’s work benches, furniture, cabinets, table legs, or equipment tables, the swivel glide leg levellers from Impromech can help you both adjust the height and lock into position your next DIY project, no matter how uneven the floor is!
-
【 BUILT-IN DURABILITY 】: High-quality, Zinc plated Swivel Leveller works well on any floor surface with its durable HDPE base. Zinc plated Steel, 3/8-16, 4-prong T-nuts & Jam Nuts included with each kit.
-
【 100% GUARANTEE 】: Impromech takes pride in the items we offer. We design, globally source, and have products carefully manufactured to our specs. ALL our products are shipped to Cochran, Georgia, to be boxed and assembled into kits by our local staff. Thanks for supporting our USA small business!
About Impromech 4 Prong Zinc Plated Steel T-Nuts & Jam
Swivel Glide Leveler Kit Includes: 4 – 3/8-16 swivel Base Glide Levelers 4 – 3/8-16 4 prong Zinc plated T-Nuts 4 -3/8-16 Zinc plated Jam Nuts Directions to Install: 1. Mark a 7/16 Drill bit to drill 2-3/8 inches deep2. Drill the leg of the Table to the depth Marked on the Drill bit 3. Tap T-Nut firmly into place driving the prongs into the wood 4. Thread Jam nut onto Swivel Glide Leveler and then thread into T-nut5. Repeat for all legs 6. Level table with a 9/16 wrench turning Nut on Swivel Glide Leveler to obtain proper height 7. Use 9/16 wrench to tighten jam nut against T-Nut to stabilize and secure Swivel Glide Leveler (If needed) Note: Jam Nuts can be discarded if not needed or to lower table more.
