We specialize in hard to find items
(3)
NEWTRY Hydraulic Ram Jack 30T Hydraulic Cylinder Low Profile Ram Jack Multi-Section 2.13” Stroke Lifting Cylinder Mini, Portable for Machinery, Bridge, Construction
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
NEWTRY Hydraulic Ram Jack 30T Hydraulic Cylinder Features
-
▷[IMPORTANT PARAMETERS] Tonnage: 30T | Stroke 1: 0.55 inch/14MM | Stroke 2: 0.83 inch/21MM | Stroke 3: 0.75 inch/19MM | Total stroke: 2.13 inches/54MM | Oil storage capacity: 58CC | Self height: 2.48 inches/63MM | Weight: 12.13 lbs/5.5kg | Compression area: 4.85 square inches/31.1cm2 | Inner diameter 1: 1.18 inches/30mm | Inner diameter 2: 1.81 inches/46mm | Inner diameter 3: 2.48 inches/63MM | External diameter: 4.13x4.92 inches/105x125mm
-
▷[MULTI-SECTION DESIGN, SUITABLE FOR NARROW SPACE]---This low profile hydraulic jack is only 2.48inches high, but the stroke is up to 2.13inches. Compared with ordinary jacks, multi-section jacks can be used in a narrower and lower space, effectively increasing the stroke of the jack within the height of the body, so that the weight can be raised higher and more convenient to use.
-
▷[SMOOTH LACQUER SURFACE & ANTI-DUST COVER]---The surface of hydraulic ram cylinder is painted with lacquer, which is not easy to rust. Made of heavy-duty metal construction, our hydraulic cylinder jack is durable and designed for long-lasting use. Anti-dust ring can reduce pollution, thereby prolonging the service life of hydraulic cylinder.
-
▷[NOTES BEFORE USE]---This multi-section jack can not be automatically retracted after the pressure is relieved, you must press down on the jack with the help of gravity in order to retract, this is not a quality problem.
-
▷[APPLICATION ARER]---This multi-section jack is widely used in the installation and maintenance of large and medium-sized machinery and equipment in the petroleum, electric power, metallurgical, steel, ship, bridge and other industries.
About NEWTRY Hydraulic Ram Jack 30T Hydraulic Cylinder
Product Description Up and down without obstacles: Special treatment of piston to prolong service life Fast Connector + Plastic Dust-proof Cover: The joint adopts threaded ZG3/8 fast joint, thread locking and compact structure. This hollow hydraulic cylinder is often used in power, chemical, steel, bridge, machinery and other industries, not for the CAR. (1). when several hydraulic jacks work at the same time, they should be directed by someone to make the lifting or falling simultaneously. Two adjacent hydraulic jacks shall be supported with wooden blocks to ensure that the gap is secured against sliding. (2). when using hydraulic jack, always pay attention to the sealing part and pipe joint part, and must ensure its safety and reliability. (3). hydraulic jacks are not suitable for sites where acids, alkalis, or corrosive gases are applied. Important Note: After pressure relief, the jack piston can not retract itself!! The jack can only retract with the help of heavy gravity, and it's not the quality problem. Note: In order to operate correctly, all cylinders need to be connected to a solid lifting surface. The use of cylinders on sandy, clay or loose surfaces can lead to cylinder damage. Technical Parameter Model: FPY-30D; Tonnage: 30T ; Stroke 1: 14MM; Stroke 2: 21MM; Stroke 3: 19MM ;Total stroke: 54MM Oil storage capacity: 58CC; Self height: 63MM; Weight: 5.5kg; Compression area: 31.1mm² Inner diameter 1: 30mm; Inner diameter 2: 46mm; Inner diameter 3: 63MM ; External diameter: 105x125mm If you have any problems, please send emails to us freely.
